1 by 4 Display Port Splitter

Supports DisplayPort specification V1.1a , Deep color video up to 12bit, resolution support up to 2560 x 1600 , Supports audio up to PCM 7.1(32-192kHz Fs sample rate), Supports pixel component formate with RGB; YCbCr 422; YCbCr 444, Color sapce conversion between RGB and YCbCr color space , Supports 1.62/2.7 Gbps data rate (Low/High bit rate), Supports flexible 1/2/4 lanes configurations; Full 10.8Gbps data ratesupport (4lanes at 2.7Gbps) , Supports EDID switch and setting Note: This device supports only DisplayPort mode, it cannot connect DP to HDMI level shift convert.

Hersteller-Nr.	CDP-14C
Hersteller	Cypress Technology

The DisplayPort (DP) 1 by 4 splitter allows single DP source to be display on four DP input monitors simultaneously. It supports video resolution up to 2560 x 1600 and audio up to PCM 7.1 switch provides a fast switch between source and display and save EDID’s reading sink time to allow image display properly. The DP 1 by 4 splitter is an ideal device for your DP source to multi display

Interfaces
Input Port	1 Displayport
Output Port	4 x DisplayPort

Video
HDCP Compliance	HDCP 1.3
Input Signal Types	2560 x 1600(Reduced Blank) 60Hz
Output Signal Type	2560 x 1600(Reduced Blank) 60Hz

Resolutions
Maximum Input	Displayport	2560 x 1600(Reduced Blank) 60Hz
Maximum Output	Displayport	2560 x 1600(Reduced Blank) 60Hz

Power
Power Supply	5V / 3A DC
Power Consumption	7W

Enclosure
Chassis Material	Aluminum
Chassis Color	Black
Dimensions (W×H×D)	270 mm x 29 mm x 124.5 mm
Weight	770g

Ordering Information
Model No.	Product Description
CDP-14C	1 by 4 Display Port Splitter

Keine Maßangaben verfügbar.

Verkaufspreis (Netto)

Auf Anfrage

zzgl. 10,00 € Versand • ab 500 € versandkostenfrei

Auf Bestellung

Lieferzeit: ca. 30 Tage

Kürzlich angesehen

Cypress Technology

Dante Wallplate Transceiver with Microphone

One standard Dante bi-directional port, High quality DAC (Digital to Analog audio Conversion) functionality from microphone to stereo audio, Powered directly by PoE (802.3af) provided by the network switch or router connected to the Dante port, Simple and easy audio routing via 3rd party control software which is available for both Windows and macOS systems, Compatible with existing Dante audio networks and AES67, Basic device configuration via serial, Dante audio networking uses standard IP networks to transmit high-quality audio with near-zero latency, Provides non-compressed audio performance, Ensures sample-accurate time alignment between networked devices, Exposes real-time latency statistics, clock status, and signal presence information to the network

Cypress Technology: AIP-D1201

Netto

Auf Anfrage

Bald